Wavetek MS1300 Especificações descarregar pdf (Página 48)

Note

Be sure that you have enabled all of the test points that you are

interested in using. The soft key is only available if there is

more than one enabled test point. (see EDIT TEST POINTS).

When you have selected the proper test point, microStealth shows

the minimum and maximum carrier level limits for that test point

on the graph. The out-of-limit portions appears as diagonal “hash”

areas. You can toggle the hash lines on and off by pressing the

key.

You can quickly check to see if all SCAN carriers are within limits

by looking at the PASS/FAIL indicator above the graph.

MEASUREMENT HOLD

You can freeze the scan measurement at any time by pressing the

SHIFT + keys. The measurement is retained even if the cable

is disconnected from the input port. Notice that the mode icon in

the upper left-hand portion of the screen flashes when the measure-

ment is on hold. Press the SHIFT + keys again to release the

hold. The measurement is not retained when another mode is

selected or the microStealth is shut off.

PRINTING THE SCREEN

You can print the entire screen at any time by pressing the SHIFT

+ keys. A bar graph appears indicating the status of the printout.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 70 71

Sem comentários

Wavetek MS1300 Especificações Página 48